设为首页 加入收藏

TOP

Cisco VLAN 配置命令详解之二
2009-03-01 08:01:09 来源: 作者: 【 】 浏览:15924

1.1.2  display interface Vlan-interface

【命令】

display interface Vlan-interface [ vlan-interface-id ]

【视图】

任意视图

【参数】

vlan-interface-id:VLAN接口的编号。

【描述】

display interface Vlan-interface命令用来显示VLAN接口的相关信息。

如果指定了vlan-interface-id,则显示指定VLAN接口的情况;如果不指定,将显示已创建的所有VLAN接口的情况。

创建VLAN接口可参考命令interface vlan-interface

【举例】

# 显示VLAN-interface 2的相关信息。

<Sysname> display interface vlan-interface 2

Vlan-interface2 current state: DOWN

Line protocol current state: DOWN

Description: Vlan-interface2 Interface

The Maximum Transmit Unit is 1500

Internet Address is 10.1.1.1/24 Primary

IP Packet Frame Type: PKTFMT_ETHNT_2,  Hardware Address: 00e0-fc00-5503

IPv6 Packet Frame Type: PKTFMT_ETHNT_2,  Hardware Address: 00e0-fc00-5503  

表1-1 display interface Vlan-interface命令显示信息描述表

字段

描述

Vlan-interface2 current state

VLAN接口的物理状态

Line protocol current state

VLAN接口的链路层协议状态

Description

VLAN接口的字符串描述

The Maximum Transmit Unit

VLAN接口允许通过的最大传输单元(MTU)

Internet Address

VLAN接口对应的IP地址,Primary表示该地址为当前接口的主IP地址

IP Packet Frame Type

IPv4发送帧格式

Hardware Address

VLAN接口对应的MAC地址

IPv6 Packet Frame Type

IPv6发送帧格式

 
 
部分项目参加人数不足时部分项目参加人数不足时 真正实现了跨越区域真正实现了跨越区域

最新文章

图片主题

热门文章